Motorola AP 7161 Installation Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Wireless Access Point
  5. AP 7161
  6. Installation manual

Motorola AP 7161 Installation Manual

Hide thumbs Also See for AP 7161:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , Installation Manual
AP 7161
ACCESS POINT
INSTALLATION GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Motorola AP 7161

Summary of Contents for Motorola AP 7161

  • Page 1 AP 7161 ACCESS POINT INSTALLATION GUIDE...
  • Page 2 AP 7161 Access Point Installation Guide...
  • Page 3 Motorola Solutions reserves the right to make changes to any product to improve reliability, function, or design. Motorola Solutions does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.

  • Page 4: Table Of Contents

    AP 7161 Hardware Installation......................13 AP 7161 Ports and Connections......................13 AP 7161 Antenna Connectors......................13 AP 7161 Antenna Options........................ 14 AP 7161 Console, GE1/POE and GE2 Ports..................15 AP 7161 Grounding Screw......................... 16 External Hardware Reset Button......................16 LED Indicators............................. 17 Three Radio LEDs..........................
  • Page 5 AP 7161 Access Point Installation Guide Warnings for the Use of Wireless Devices..................37 Potentially Hazardous Atmospheres....................37 Safety in Hospitals.......................... 37 RF Exposure Guidelines........................38 Safety Information..........................38 Reduce RF Exposure - Use Properly....................38 Remote and Standalone Antenna Configurations................38 Power Supply.............................

  • Page 6: Introduction

    2.4GHz and 5GHz bands to deliver 24x7 rogue detection and termination. The AP 7161 is optimized with WiNG 5 intelligence, extending QoS, security, and mobility services to the access point to support better capacity and performance.

  • Page 7: Document Conventions

    AP 7161 Access Point Installation Guide Document Conventions The following graphical alerts are used in this document to indicate notable situations: NOTE Tips, hints, or special requirements that you should take note of. CAUTION Care is required. Disregarding a caution can result in data loss or equipment malfunction.

  • Page 8: Ap 7161 Hardware

    Outdoor, dipole, 5dBi, N-Male, 5GHz 5.2-5.8 6.75 ML-5299-HPA5-01 AP 7161 Dual Band Antenna Height Antenna Description Band Gain (inches) Outdoor, dipole, 4.5dBi/7.5dBi, N-Male, multiband 2.4-5.0 4.5/7.5 ML-2452-HPAG5A8-01 NOTE dual band antenna must be used with AP 7161-66S40-US and AP 7161-66S40-WR models for sensor mode...

  • Page 9: Hardware Accessories

    AP 7161 Access Point Installation Guide Hardware Accessories Hardware accessories for the AP 7161 access point that can be ordered include a Power over Ethernet (PoE) unit and mounting hardware. PoE Accessories Hardware Accessory Part Number IP66 802.3at gigabit Ethernet power injector 100-240VAC US AP-PSBIAS-7161-US IP66 802.3at gigabit Ethernet power injector 100-240VAC International...

  • Page 10: Package Contents

    • Become familiar with all grounding requirements (see Installing an AP 7161 on page • The grounding cable for an AP 7161 must be a #10 gauge wire cross section. The cable can be attached to the unit using one of the three recommended methods: Loosen the grounding screw, insert the grounding cable into the hole below it, and tighten the screw.

  • Page 11: Warnings

    • Do not operate a portable transmitter near unshielded blasting caps or in an environment where explosives are present unless the transmitter is especially certified for such use. • Refer to your site survey, network analysis reports, and the AP 7161 System Planner to determine specific requirements for each deployment.

  • Page 12: Access Point Placement

    Grounding Requirements To avoid damage to the equipment, become familiar with Motorola Solutions Policy R56 before installing AP 7161 units. Refer to Standards and Guidelines For Communication Sites, Version B. Both the hardcopy manual (Part Number 68P81089E50-B) and the CD version (Part Number 9880384V83) can be ordered from Motorola Solutions.

  • Page 13: Ap 7161 Hardware Installation

    • Console Port An AP 7161 must be installed by trained professionals familiar with RF planning and regulatory limits defined by the regulatory bodies of the country where the devices are being deployed. All common precautions for grounding and ESD (Electrostatic Discharge) protection should be observed during deployment and installation.

  • Page 14: Ap 7161 Antenna Options

    AP 7161 Antenna Options The AP 7161 access point supports options for 2.4 GHz, 5 GHz, and a dual band antenna. The AP 7161 can be purchased in a three radio configuration. If a three radio unit is purchased, the access point ships with two dual band antennas that should be connected to ports R3-A and R3-B.

  • Page 15: Ap 7161 Console, Ge1/Poe And Ge2 Ports

    AP 7161 Access Point Installation Guide AP 7161 Console, GE1/POE and GE2 Ports The AP 7161 has Ethernet ports for external Console, GE1/POE, and GE2 connections.To gain access to the ports you will need to remove the protective caps. The Ethernet cable from the PoE device (if used) connects to the GE1/POE port on the unit.

  • Page 16: Ap 7161 Grounding Screw

    This option is supported by software. Please refer to the release notes for the appropriate software to check for availability. An AP 7161 can be physically reset using the hardware reset button. The button is located inside the reset port on the bottom of the unit.

  • Page 17: Led Indicators

    LED Indicators The AP 7161 access point has six LEDs on the top of the access point housing. The access point utilizes two different colored lights below each LED. Only one light displays within an LED at any given time.

  • Page 18: Three Radio Leds

    AP 7161 Access Point Installation Guide The top housing LEDs have the following display and functionality: Three Radio LEDs A three radio access point with sensor (P/N AP-7161-66S40-US and AP-7161-66S40-WR) has the following unique LED behavior: LED 1 LED 2...

  • Page 19: Dual Radio Leds

    Blinking Red at 1 second interval indicates POST failure. CAUTION If LED 6 remains blinking Red for longer than 10 minutes, cycle the power to the unit. If the condition persists, contact the Motorola Solutions support center.

  • Page 20: Installing An Ap 7161

    • Adjustable wrench (alternative for U-bolt, 1/2 inch and 3/4 inch bolts and nuts) Mounting Bracket Options The AP 7161 mounting hardware kit (P/N KT-147407-01) and extension arm (P/N KT-150173-01) support several options for installation. The AP 7161 mounting hardware kit includes the access point, angle adapter, and pole mount bracket sections.

  • Page 21: Extension Arm

    Extension Arm When mounting an AP 7161 on poles more than 3 inches in diameter, a minimum standoff distance of twelve inches is required to avoid interference with the antennas. The extension arm for the mounting kit (P/N KT-150173-01) can be used alone, or when...

  • Page 22: Pole Mounted Installations

    Pole Mounted Installations The mounting hardware kit and extension arm can be used in various combinations to properly install the AP 7161 on a pole. For poles of up to 3 inches in diameter, attach the pole mount section of the mounting hardware kit at the desired position on the pole using a 1/2 inch U-bolt and nuts.

  • Page 23: Vertical Pole Mount

    AP with the gore vent. Using a torque wrench or a ratchet and a 10mm socket, attach (but don’t tighten) the access point bracket section to the AP 7161 with the with four M6 hex flange screws.
  • Page 24 AP with the gore vent. Using a torque wrench or a ratchet and a 10mm socket, attach (but don’t tighten) the access point bracket section to the AP 7161 with the with four M6 hex flange screws.
  • Page 25 AP 7161 Access Point Installation Guide Rotate the access point bracket section upward and align the top holes on the sides with the top holes on the angle adapter bracket section. Insert two M6 hex flange screws into the top holes on the angle adapter bracket section.

  • Page 26: Wall Mounted Installations

    The lag bolts are not included in the mounting bracket kits. CAUTION Always mount the AP 7161 with the black gore vent facing down. With the open slot connections facing down, attach the angle adjust bracket section at the desired mounting location using four #10/32 lag bolts.
  • Page 27 AP 7161 Access Point Installation Guide Use a torque wrench or a ratchet and a 10mm socket to finish attaching the angle adapter bracket section to the access point bracket section with the four M6 hex flange screws in the open slot connections and the top holes on the angle adapter bracket section.

  • Page 28: Installing The Power Over Ethernet (Poe) Unit

    CAT5E cables. The port labeled DATA PWR OUT is used for the connection to the AP 7161. The port labeled DATA IN is used for the connection to the wired network. If the CAT5E cable used...

  • Page 29: Poe Unit Specifications

    AP 7161 Access Point Installation Guide PoE Unit Specifications Parameter Description Input voltage 100-240 VAC (50-60 Hz) Input current 1 ampere (maximum) Maximum available output power 30 Watts Nominal output voltage 54 to 57 VDC Operating voltage 48 VDC (compatible with PoE .3af/.3at Draft)

  • Page 30: Installing The Poe Unit

    To install the PoE unit: Using the mounting hardware provided, mount the unit as required for an AP 7161 pole or wall mount installation. Connect the earth ground cable to the unit and properly connect the cable to an external ground.

  • Page 31: Other Ap 7161 Power Options

    AP 7161 Access Point Installation Guide When connecting Ethernet cable from the DATA PWR OUT port on the PoE unit to the AP 7161 GE1/POE port, a properly rated RJ45 connector is required. One Weatherproof RJ45 plug kit is provided with each access point. When connecting cables to the AP 7161 Ethernet ports, follow the instructions in the connector packaging and tighten the connectors to create a weatherproof seal.

  • Page 32: Basic Ap 7161 Configuration

    Once adopted, the access point is managed by its connected controller and can receive periodic firmware updates when Motorola Solutions releases updates with new controller functionality. For information on how use a Motorola Solutions RFS Series controller to manage an AP 7161 access point, refer to http://support.symbol.com/support/product/manuals.do.

  • Page 33: Specifications

    AP 7161 Access Point Installation Guide Specifications Hardware Specifications Operating Voltage 36-57 VDC Operating Current Not to exceed 750 mA@48 VDC Power In (PoE) PoE support inbound power - 802.3AT on GE1/POE port Dimensions (unit) mounted 28.1cm W x 21.8cx H x 9.4cm D (11.1" W x 8.6" H x 3.7" D) Weight (Unit) 6.4 lbs / 2.9 Kg...
  • Page 34 EN 301 893, v1.5.1 DFS;EN 302 502 DFS;EN 300 328 Industry Canada; China SRRC Australia/New Zealand Safety* UL 60950-1, -22; CSA C22.2 No.60950-1-07, -22 CB-IEC 60950 -1, 22; EN 60950-1:2006+ A11:2009 RoHS/WEEE/CMM; CE * For more country specific regulatory information please contact Motorola or your authorized partner.
  • Page 35 • IP66 outdoor rated 802.3AT power injector • Mounting kit for outdoor IP 66 802.3AT power injector • External antenna options Warranty • One (1) year on AP 7161 hardware (accessories not included) • (30) day on accessories • (90) day on software...

  • Page 36: Basic Troubleshooting

    AP 7161 Access Point Installation Guide Basic Troubleshooting Basic troubleshooting recommendations for the AP 7161 access point are listed in the following table: Indication Response LEDs are not lit No power to device: • Verify 802.3at compatible source is connected via PoE •...

  • Page 37: Regulatory Compliance

    Motorola Solutions, Inc. (collectively “Motorola”). All Motorola Solutions devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Motorola Solutions equipment, not expressly approved by Motorola Solutions, could void the user's authority to operate the equipment.

  • Page 38: Rf Exposure Guidelines

    AP 7161 Access Point Installation Guide RF Exposure Guidelines Safety Information The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. Reduce RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied.

  • Page 39: Radio Frequency Interference Requirements - Canada

    • Italy requires a user license for outside usage Statement of Compliance Motorola Solutions hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www.motorola.com/doc.

  • Page 40: Other Countries

    Regulatory Declarations for AP 7161 - BRAZIL Note: The certification mark applied to the AP 7161 is for Restrict Radiation Equipment. This equipment operates on a secondary basis and does not have the right for protection against harmful interference from other users including same equipment types.
  • Page 41 AP 7161 Access Point Installation Guide Wireless device operates in the frequency band of 5.25-5.35 GHz, limited for indoor use only. 5.25-5.35...

  • Page 42: Waste Electrical And Electronic Weee

    AP 7161 Access Point Installation Guide Waste Electrical and Electronic WEEE...
  • Page 43 AP 7161 Access Point Installation Guide...

  • Page 44: Motorola Solutions Support Center

    • Software type and version number Motorola Solutions responds to calls by e-mail, telephone, or fax within the time limits set forth in support agreements. If you purchased your product from a Motorola Solutions business partner, contact that business partner for support.

  • Page 45: Ap 7161 Series Rohs Compliance

    (PBB) (Parts) (Metal Parts) (Circuit Modules) (Cables and Cable Assemblies) (Plastic and Polymeric Parts) (Optics and Optical Components) (Batteries) SJ/T11363-2006 SJ/T11363-2006 This table was created to comply with China RoHS requirements for the Motorola Solutions AP 7161 model access point.
  • Page 46 AP 7161 Access Point Installation Guide...
  • Page 47 AP 7161 Access Point Installation Guide...
  • Page 48 Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Solutions, Inc. All Rights Reserved.

Table of Contents