Motorola WiNG 5.5 Reference Manual page 205

37. Refer to the following fields to define Remote VPN Client Configuration settings:
Shutdown
Transform Set
38. Refer to the following fields to define the Remote VPN Client Peer list.
IKEV2 Peer
Priority
39. Select OK to save the updates made to the
configuration.
40. Select the Global Settings
The Global Settings screen provides options for Dead Peer Detection (DPD). DPD represents the actions taken upon the
detection of a dead peer within the IPSec VPN tunnel connection.
Figure 5-70 Profile Security - Remote VPN Client tab
Select this option to disable the remote VPN client. The default is disabled.
Configure the transform set used to specify how traffic is protected within the crypto ACL
defining the traffic that needs to be protected. Select the appropriate traffic set from the
drop-down menu or click the icon next to the drop-down menu to create a new transform
set.
Use the drop-down menu to select the remote IKE v2 peer. Use the icon next to the drop-
down to create a new peer.
Use the spinner to set the priority in which a remote peer is connected. The lower the
number the higher the priority.
Remote VPN Client
tab.
Device Configuration 5 - 119
screen. Selecting Reset reverts the screen to its last saved