Motorola WiNG 5.5 Reference Manual page 465

7. Set the following Load Balancing Settings (2.4
Single Band Clients
Max Probe Requests
Probe Request Interval
8. Set the following Load Balancing Settings (5
Single Band Clients
Max Probe Requests
Probe Request Interval
9. Select OK when completed to update this WLAN's client load balance settings. Select
its last saved configuration.
GHz):
Select this option to enable single band client associations on the 2.4 GHz frequency, even
if load balancing is available. The default setting is enabled.
Enter a value (from 0 - 10,000) for the maximum number of probe requests for client
associations on the 2.4 GHz frequency. The default value is 60.
Enter a value in seconds (from 0 - 10,000) to set an interval for client probe requests,
beyond which association is allowed for clients on the 2.4 GHz frequency. The default
setting is 10 seconds.
GHz):
Select this option to enable single band client associations on the 5.0 GHz frequency, even
if load balancing is available. The default setting is enabled.
Enter a value (from 0 - 10,000) for the maximum number of probe requests for client
associations on the 5.0 GHz frequency. The default value is 60.
Enter a value in seconds (from 0 - 10,000) to set an interval for client probe requests,
beyond which association is allowed for clients on the 5.0 GHz frequency. The default
setting is 10 seconds.
Wireless Configuration 6 - 39
Reset to revert the screen back to