Placing A Call - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set
Contents

Placing a call

You can use the Call Control page to place a call.
Even if the web interface is used to initiate the call,
it is the video system (display, microphones and
loudspeakers) that is used for the call; it is not the PC
running the web interface.
Calling
You can call someone either by choosing a contact name in
the Local, Directory or Recents lists, or by typing a complete
URI or number in the Search or Dial field. Then click
the associated contact card.
Searching the contact lists
Enter one or more characters in the Search or Dial field.
Matching entries from the Local, Directory and Recents lists
will be listed as you type.
Select the correct entry in the list and click Call.
D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
Navigate to: Call Control
Call in
Click a contact name, either in the
Local, Directory or Recents lists.
Then click
Alternatively, enter the complete URI
or number in the Search and Dial
field. Then click the
appears next to the URI or number.
System settings
Calling someone
Call in the contact card.
Call button that
15
Administrator Guide
Setting passwords
Ending a call
If you want to terminate a
call, click End all
button.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
Appendices
or the