Systemunit Settings; Systemunit Name; Systemunit Contactinfo Type; Systemunit Menulanguage - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set
Contents

SystemUnit settings

SystemUnit Name

Enter a System Name to define a name of the system unit. The system name will be displayed:
1) When the codec is acting as an SNMP Agent.
2) Towards a DHCP server.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
SystemUnit Name: "Meeting Room"
Example:

SystemUnit MenuLanguage

This has been replaced with the UserInterface Language setting.

SystemUnit CallLogging Mode

Set the call logging mode for calls that are received or placed by the system. The call logs may
then be viewed via the web interface.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable logging.
On: Enable logging.
SystemUnit CallLogging Mode: On
Example:
D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings

SystemUnit ContactInfo Type

Choose which type of contact information to show in the status field in the upper left corner of
the display and Touch controller.
Requires user role: ADMIN
Value space: <Auto/None/IPv4/IPv6/SipUri/SystemName/DisplayName>
Auto: Show the address which another system can dial to reach this system. The address
depends on the system registration.
None: Do not show any contact information in the status field.
IPv4: Show the IPv4 address as contact information.
IPv6: Show the IPv6 address as contact information.
SipUri: Show the SIP URI as contact information (see the SIP Profile [1..1] URI setting).
SystemName: Show the system name as contact information (see the SystemUnit Name
setting).
DisplayName: Show the display name as contact information (see the SIP Profile [1..1]
DisplayName setting).
SystemUnit ContactInfo Type: Auto
Example:
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
90
Administrator Guide
Setting passwords Appendices