Changing The Call Rate, Before Placing A Call - Cisco TelePresence EX60 User Manual

16 Point-to-point video calls

Changing the call rate, before placing a call

Tap Call Rate,
as outlined.
Change the call rate
by moving the slider,
as outlined.
Tap CALL to place the call,
as outlined.
About call rate
Call rate is the term used to express
the amount of bandwidth allocated
to the call in kbps (kilobits per
second). The higher the call rate is
the better the quality will be.
Why would you like to change this?
In most cases you will use it to avoid
choking the video call when you
try to call someone at a higher rate
than their system and connection
supports.
D15016.07 User Guide Cisco TelePresence
EX60, EX90
Produced: October 2013 for TC6.3
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.