MANUAL TRANSAXLE cFWD> - On-vehicle Service
R.H. side
MD998325
side
Oil seal lip
DRIVE SHAFT OIL SEALS REPLACEMENT
(1) Disconnect the drive shaft from the transaxle.
(Refer to GROUP 26 - Drive Shaft.)
(2) Using a flat-tip (-) screwdriver, remove the oil seal.
(3) Using the special tool, tap the drive shaft oil seal into
the transaxle.
The drive shaft oil seal must be installed in the direction
shown.
(4) Apply a coating of the transmission oil to the lip of the
oil seal.
160024
2200037
00001754