Mitsubishi 3000GT Service Manual page 779

Fail Safe and Diagnosis List
i output
Output Code
Code No.
indication Pattern
0
62
63
NOTE
(1) Control stop, warning indication and fixed damping force return to normal when the ignition switch is set to
OFF.
When any of the problems marked * occurs, if no subsequent problem occurs (for example, when the problem
is transient), normal operation will be restored even if the ignition switch is not set to OFF.
(2) Even if control stop, warning indication and fixed damping force return to normal as described above, the diagnostic
trouble code is stored in the memory in the ECS control unit.
(3) The diagnostic trouble code can be force-cleared by use of the scan tool or by stopping the power supply
to the ECS control unit. In addition, it is automatically cleared if the ON/OFF control of the ignition switch is
repeated 60 times after the diagnostic trouble code has been output, provided that no new diagnostic trouble
code is output during the period.
Diagnostic Item
[Good]
G sensor defective*
Steering angular
Vehicle speed sensor
.
F. L. damping force
R. R. damping
TSB Revision
Fail Safe
[Good]
Ride controls (pinching and bouncing
l
control, bad road detection control) stop.
Anti-roll control stops.
l
Steering stability controls (anti-roil, high
l
speed sensitive controls) and attitude
controls (anti-dive, anti-squat) stop.
Shock absorber damping force fixed at
l
MEDIUM
All ECS controls stop.
l
Normal shock absorber damping force
l
fixed at HARD.
1