Mitsubishi 3000GT Service Manual page 431

INTAKE AND EXHAUST
INTAKE MANIFOLD PLENUM <Non Turbo>
REMOVAL AND INSTALLATION
Post-installation operation
Accelerator Cable Adjustment
l
(Refer to GROUP 13F - Engine Control.)
Removal steps
1. Air intake hose connection
2. Accelerator cable connection
3. Throttle body assembly
5. Brake booster vacuum hose connec-
tion
6. Harness connectors
7. VIC motor connection
8. EGR pipe cup to 1995 model for
California and from 1996 model>
9. EGR valve cup to 19.95 model for
California and from 1996 model>
10. EGR valve gasket
from 1996 model>
11. EGR temperature sensor
5 Nm
60 Nm
43 ft.lbs.
TSB Revision
18 Nm
13 ft.lbs.
12. Manifold differential pressure sensor
13. Accelerator cable bracket
14. Intake manifold plenum stay connec-
tion
15. Intake manifold plenum installation
bolts
16. Intake manifold plenum installation
nuts
17. Intake manifold plenum
18. Intake manifold plenum gasket
NOTE
Up to 1993 model
2 From 1994 model
l