Specifications; Ec Declaration Of Conformity - Makita LS1040 Instruction Manual

SPECIFICATIONS

Model
Blade diameter .................................................................................................................................. 255 mm — 260 mm
Hole (arbor) diameter
For all countries other than European countries .......................................................................... 25.4 mm and 25 mm
For European countries ...................................................................................................................................... 30 mm
Max. cutting capacities (H x W) with blade 260 mm in diameter
Bevel angle
0°
45° (left)
–1
No load speed (min ) ............................................................................................................................................ 4,600
Dimensions (L x W x H) ..................................................................................................... 530 mm x 476 mm x 532 mm
Net weight ...............................................................................................................................................................11 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for accurate straight and miter cutting in wood. With appropriate saw blades, aluminum can also
be sawed.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can,
therefore, also be used from sockets without earth wire.
For public low-voltage distribution systems of between 220 V and 250 V
Switching operations of electric apparatus cause voltage fluctuations. The operation of this device under unfavorable
mains conditions can have adverse effects to the operation of other equipment. With a mains impedance equal or less
than 0.30 Ohms it can be presumed that there will be no negative effects. The mains socket used for this device must
be protected with a fuse or protective circuit breaker having slow tripping characteristics.
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level:
sound power level:
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
Miter angle
69 mm x 135 mm
35 mm x 135 mm
For European countries only
93 dB (A)
106dB (A)
2
.
0°
93 mm x 95 mm
53 mm x 95 mm
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is
in compliance with the following standards or standardized
documents,
EN61029, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
45° (left and right)
93 mm x 67 mm
69 mm x 95 mm
49 mm x 67 mm
35 mm x 94 mm
Yasuhiko Kanzaki CE 97
Director
LS1040