Status Code List - Dell 2135cn Service Manual

2.3 Status Code List

The error messages for the errors which automatically reset themselves or those which
occur during the operation of Copy/Push Scan will not appear on the "Status Window".
Error Message
Panel Message
001-360 Printer
Restart Printer
Contact Support
If Message Returns
MCU Firmware Error
Error 003-340
Code: XX
Restart Printer
NVM Error
Error 003-356
Code:xxxxxxxx
Restart Printer
Version 2 2008.03.31
Status Window
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
001-360
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
003-340-000000xx
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
003-356
Error Contents
<IOT Fan Motor Failure>
Fan Motor failure is detected.
<IOT Firmware Error>
MCU firmware error occurred.
Code: XX
01: Task Over
02: Time Over
03: NV Write Retry
04: NV Write Queue Over
05: LEISUS Send Over
06: CRUM Data
07: Pursuit Comp
08: Pursuit SUM
09: Fuser NV
0A: Dispense
0B: FSR SBY Mode
0C: Media ERR2
0D: Hanpa
0E: FSR SBY Mode
0F: FSR Print Mode
10: Renzoku Heater
11: PPM Group ERR
12: CMODE ERR
13: Send CMD ERR
14-25h:Not Used
<IOT NVRAM Error>
The error is detected at MCU NVRAM
check.
Code:
1000-17FF PWBA MCU NVM
3000-30FF PHD CRUM
3100-31FF Y Toner CRUM
3200-32FF M Toner CRUM
3300-33FF C Toner CRUM
3400-34FF K Toner CRUM
3800-38FF PWBA EEPROM
1 - 14
Chapter 1 Troubleshooting
FIP to be
referred
Flows 1
FIP-1. 1
Flows 2
FIP-1. 2
Flows 3
FIP-1. 3