4.5 Installation Set
Specifies whether or not Alarm display of Toner residual quantity is performed.
4.5.1 Executing Installation Set
1)
Turn off the power.
2)
Turn on the power while holding down "
3)
Release the fingers from these keys when "Please wait..." is displayed.
4)
The "Customer Mode", "Printer" and "FAX Scanner" are displayed. (Entered the Diag. mode.)
5)
Press "
" key. (Entered the Printer Diag. mode.)
6)
Press "
" to select "Installation Set", and then press "
7)
Press "
" key to select the ON or OFF.
8)
Press "
" key to execute the setting.
To exit the test or to returning to one step higher menu, press "CANCEL" key.
Version 1 2008.02.01
" and "
" keys.
" key.
2 - 32
Chapter 2 Operation of Diag.