NEC Univerge SV8100 Features And Specifications Manual page 1814

Issue 7.0
Program
Program Name
Number
15-05-07 IP Telephone Terminal Basic
Data Setup – Using IP Address
15-05-15 IP Telephone Terminal Basic
Data Setup – CODEC Type
15-05-16 Authentication
Password
15-05-18 IP Telephone Terminal Basic
Data Setup – IP Duplication
Allowed Group
15-05-40 IP Telephone Terminal Basic
Data Setup – Calling Name
Display Info via Trunk for
Standard SIP
Operation
Placing an outside call with pre-dial:
1. Dial 9.
2. Press and hold the
3. Dial the outside number.

4. Press the key (On-Hook/Off-Hook).
For more information on the Wireless DECT (SIP) feature, refer to the NEC SIP DECT Solutions
Manuals.
2 - 1786
Description/Comments
Review the registered IP Phones
IP Address [Informational Only].
Assign the registered IP Phone
Codec type of the MLT SIP –
Reference Program 84-11 Dterm
IP Codec Basic Information.
Assign the authentication
password for SIP single line
telephones.
If an adapter has one IP address
coming in but multiple extensions
going out of it, assign all the
extensions to a group so the CPU
knows that the one IP address is
assigned to multiple extensions.
Sets the incoming calling name
display type on a standard SIP
terminal. Trunk name is the first
priority and abbreviated (SPD)
name is second priority.
key to insert a pause (–), if necessary.
#
UNIVERGE SV8100
Assigned Data
1
0.0.0.0~

255.255.255.255
(default = 0.0.0.0)
1-Type 1
2-Type 2
3-Type 3

4-Type 4
5-Type 5
(default = 1)
Up to 24 characters

(default = None)
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5

6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
(default = 0)
0 = Both name and
number
1 = Name only
2 = Number only
3 = None
(default = 0)
Wireless DECT (SIP)
Level
2 3
