NEC Univerge SV8100 Features And Specifications Manual page 1766

Issue 7.0
Preamble

Time, Date and Station Number Check

ACD Queue Depth Announcements

Main software Version 4000 (4.01 or higher) and the Version 4000 Main Version license

is required to support this feature.
Outside caller messages are stored in VRS message locations 091-100.

For greetings and other menu options VRS message locations 001-004 are available.

When the InMail CF is installed on the system this feature is not available.

The Voice Response System (VRS) Upload Download Audio feature is not available for

Embedded VRS.
One of the supported embedded VRS language prompt sets must be loaded onto the

CCPU for this feature to work. The language prompt sets are available on the NTAC
download site.
VRS MOH is not supported with Embedded VRS.

When Embedded VRS is enabled, preview dial strings must start with

The operator extension large LED (message waiting), does not light for messages left by

outside callers on Embedded VRS.
Installing Language Prompt Sets
The procedure to load a language prompt set is similar to upgrading the system software. The same
USB memory used for system software upgrades should be used. Before extracting the language
prompt set to the USB memory delete all of the system software upgrade files.
To load an Embedded VRS language prompt set:
1. Download the appropriate language prompt set from the NTAC download site.
2. Delete all existing files on the USB memory.
3. Extract archive file to the USB memory.
4. Turn the system power Off.
5. After the system powers down, insert the USB memory containing the language prompt set into the
USB port on the CD-CP00-US.
6. Push in and hold the Load button.
7. Turn the system power On.
8. Continue holding the Load button for approximately 10 seconds or until Status LED5 begins
flashing red.
2 - 1738 Voice Response System (VRS) Embedded VRS
UNIVERGE SV8100
.
