NEC Univerge SV8100 Features And Specifications Manual page 1385

UNIVERGE SV8100
Default Setting
None
System Availability
Terminals
None
Required Component(s)
None
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
 The items highlighted in gray are read only and cannot be changed.
Encryption
Program
Program Name
Number
10-46-07 DT700 Server Information Setup
– Encryption Mode
SV8100/SV8300 Terminals
Description/Comments
Set encryption for signaling
(requires system reset)
.
Assigned Data
1
0 = Off
1 = On
(default = 0)
Issue 7.0
Level
2 3

2 - 1357