NEC Univerge SV8100 Features And Specifications Manual page 1605

UNIVERGE SV8100
Program
Program Name
Number
47-01-08 VM8000 InMail System Options –
Delay in Dialing Digital Pager
Callback Number
47-01-09 VM8000 InMail System Options –
Wait Between Digital Pager
Callout Attempts
VM8000 InMail
Description/Comments
Set the time delay (0~99 seconds)
that occurs just before VM8000
InMail dials the Digital Pager
Callback Number portion of the
Message Notification callout
number for a digital pager. Set this
delay so the pager service has
enough time to connect to the
digital pager before sending the
callback number. Your pager
service may be able to help you
determine the best value for this
option (0~99 seconds). When
placing a digital pager notification,
the system:
Seizes the trunk specified.
Dials the user-entered notification
number (in Message + OP + N).
Waits the 47-01-08: Delay in
Dialing
Digital Pager Callback Number
interval. Dials the number entered
in 47-01-07:
Digital Pager
Callback Number. The system
assumes that the notification
number completes dialing
approximately four seconds after
trunk seizure. This means that, by
default, the Digital Pager Callback
Number is dialed into the pager
service about 13 seconds after
trunk seizure.
Set the minimum time between
unacknowledged or unanswered
digital pager Message Notification
callouts. (A subscriber
acknowledges a digital pager
notification by logging onto their
mailbox.)
After this time expires, VM8000
InMail tries the callout again (for
up to the number of times set in
47-01-14: Number of Callout
Attempts).
If the system dials the callout
number and the pager service is
busy, it retries the number in one
minute.
Assigned Data
1
0~99 (seconds)
(default = 9)
1~255 (minutes)
(default = 15)
Issue 7.0
Level
2 3


2 - 1577