NEC Univerge SV8100 Features And Specifications Manual page 1489

UNIVERGE SV8100
Program
Program Name
Number
16-02-01 Department Group Assignment
for Extensions
20-01-10 System Options – Trunk Guard
Timer
20-02-12 System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
20-06-01 Class of Service for Extensions
20-08-05 Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-13-10 Class of Service Options
(Supplementary Service) –
Barge-In Monitor
UCB (Unified Communications for Business)
Description/Comments
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
The time the system waits to seize
the next outside line after the
system releases an outside line.
Enable/Disable Forced Intercom
Ringing. If enabled, incoming
Intercom calls normally ring. If
disabled, Intercom calls
voice-announce.
Assign Class of Service (1~15) for
extensions.
Turn Off or On extension user
ability to use Dial Number Preview.
Determine if the ISDN calling line
identity presentation and
screening indicators are to be
allowed.
Determine if an extension Class of
Service should either allow a
normal or extended Park.
(1 = Extended for Program
24-01-07).
Enable the extension Barge-In as
Speech or Monitor Mode.
Assigned Data
1
Department Groups
1~64
Priority 1-999
Default = All
extensions in

Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 256 priority = 256
0~64800 (seconds)

(default = 1)
Set to 0
0 = Disable (Voice)
1 = Enable (Signal)

(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension
ports = Class 1
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 0 for COS
1~15)
0 = Speech
1 = Monitor

(default = 0 for COS
1~15)
Issue 7.0
Level
2 3
2 - 1461