Replacement 2
When replacing the SEPARATOR ROLLER or the FEED ROLLER replace the SEPARA-
TOR ROLLER and the two FEED ROLLERs at the same time.
1)
Slide the FEED ROLLERs onto the shafts so that the lugs on the FEED ROLLERs are mated
with the notches on the GEAR NUDGER A4 (PL3.2.46) and CLUTCH ONEWAY FEED
(PL3.2.52). Lock the hooks on the other end of the FEED ROLLERs into the grooves on the
shafts.
Continues to the next page.
Version 1 2008.01.08
KIT SEPARATOR ROLLER & FEED ROLLER (PL2.2.99)
1)
Chapter 3 Removal and Replacement Procedures (RRPs)
1)
3 - 96
Kmy03117KA