Replacement 7
2)
1)
1)
Replace the INTERLOCK SWITCH by mating the hole on the INTERLOCK SWITCH with
the boss on the printer.
2)
Secure the INTERLOCK SWITCH to the printer using the one screw (silver, tap, 16mm).
3)
Route the harness of the INTERLOCK SWITCH to the duct of the printer.
4)
Replace the clamp that fixes the harness of the INTERLOCK SWITCH to the SHIELD LVPS.
5)
Engage the connector (P/J44) of the INTERLOCK SWITCH to the LOW VOLTAGE POWER
SUPPLY.
Go to the next replacement step:
Replacement 13 TOP COVER (PL1.1.1)
Version 3 2008.05.30
INTERLOCK SWITCH (PL9.1.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3)
3 - 106
4)
5)
Zna03110KB