Replacing Separator Rollers; Removing The Used Separator Roller In Tray - Dell 3110CN Owner's Manual

Replacing Separator Rollers

There are three separator rollers in the printer which need to be replaced periodically. One is in the
tray and the others are inside the printer. Basically, all the separator rollers are replaced in the same
way as described in this section.
CAUTION:
To prevent electric shock, always turn off the printer and disconnect the power cable from
the grounded outlet before performing maintenance.
CAUTION:
Before performing any of the following procedures, read and follow the "CAUTION: Safety
Instructions" on page 9.
NOTE:
For information on when to replace rollers, see "Print Cartridge and Printer Life" in User's Guide.
Dell separator rollers are available only through Dell. To order by phone, see "Order Printer
Supplies" on page 2.
Dell recommends Dell separator rollers for your printer. Dell does not provide warranty coverage
for problems caused by using accessories, parts, or components not supplied by Dell.

Removing the Used Separator Roller in Tray

Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front
1.
slightly, and remove it from the printer.
NOTE:
Remove all paper from the tray before opening the separator roller cover.
69
Maintenance