Removal 42 Kit Separator Roller & Feed Roller (Pl2.2.99) - Dell 3130cn Service Manual

Removal 42 KIT SEPARATOR ROLLER & FEED ROLLER (PL2.2.99)
When replacing the SEPARATOR ROLLER or the FEED ROLLER replace the SEPARA-
TOR ROLLER and the two FEED ROLLERs at the same time.
1) Remove the 250 SHEET PAPER TRAY (PL2.1.1) from the printer.
2)-1
2) Release the left and right hooks of the CVR SPRTR CST (PL2.2.13), and then open the CVR
SPRTR CST.
3) Release the hook of the SEPARATOR ROLLER (PL2.2.17), and then remove the SEPARATOR
ROLLER from the SHAFT SEPARATOR (PL2.2.15).
Continues to the next page.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
2)-2
3 - 82
3)-1
3)-2
2)-1
Zna03055KA