Removal 49 HARD DISK (PL9.1.47)
Use a wristband to protect the HDD from electrostatic damage.
1)
Loosen the SCREW KNURLING (PL9.1.44), and then open the SHIELD WINDOW
(PL9.1.21).
2)
Remove the two SCREW KNURLINGs (PL9.1.22) that fix the HARD DISK (PL9.1.47) to the
printer.
3)
Remove the HARD DISK from the ELECTRONIC SUB-SYSTEM CONTROL BOARD
(PL9.1.27).
Version 3 2008.05.30
2)
2)
Chapter 3 Removal and Replacement Procedures (RRPs)
3)
1)
3 - 92
Zna03232KB