Removal 20 Power Switch (Pl9.1.13) - Dell 3110cn Service Manual

Removal 20 POWER SWITCH (PL9.1.13)

Steps 1 through 4 are for reference. Before removing this component, check that Steps 1 through 4
have been performed.
1) Open the FRONT COVER (PL1.2.1).
2) Remove the FUSER. (Removal 8)
3) Remove the REAR COVER. (Removal 12)
4) Remove the RIGHT COVER. (Removal 13)
5) Disengage the connector (P/J481) of the POWER SWITCH (PL9.1.13).
6) Remove the POWER SWITCH by releasing its hook.
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
5)
3 - 39
6)-1
6)-2
6)-1
Kmy03030KA