The Provisioning Settings - Cisco EX90 Administrator's Manual

Cisco TelePresence System EX90/EX60
Contents

The Provisioning settings

Provisioning Mode
Provides the possibility of managing the codec (endpoint) by using an external manager/management
system.
Requires user role: ADMIN
Value space: <Off/TMS/Callway>
Off: The system will not try to register to any management system.
TMS: If set to TMS (Cisco TelePresence Management System) the system will try to register with a
TMS server. Contact your Cisco representative for more information.
Callway: If set to Callway the system will try to register with the Callway subscription provider.
Contact your Callway provider for more information.
Example: Provisioning Mode: TMS
Provisioning LoginName
Enter the user id provided by the provisioning server. This is the user name part of the credentials
used to authenticate towards the HTTP server when using HTTP provisioning.
Requires user role: ADMIN
Value space: <S: 0, 80>
Format: String with a maximum of 80 characters.
Example: Provisioning LoginName: ""
Provisioning Password
Enter the password provided by the provisioning server. This is the password part of the credentials
used to authenticate towards the HTTP server when using HTTP provisioning.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: Provisioning Password: ""
Provisioning HttpMethod
Select the HTTP method to be used for the provisioning.
Requires user role: ADMIN
Value space: <GET/POST>
GET: Select GET when the provisioning server supports GET.
POST: Select POST when the provisioning server supports POST.
Example: Provisioning HttpMethod: POST
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Introduction Using the web interface Advanced configuration
The Provisioning settings,
cont...
Provisioning ExternalManager Address
Enter the IP Address to the External Manager/Management system. If an External Manager address
and a path is configured, the system will post an HTTP message to this address when starting up.
When receiving this HTTP posting the External Manager (typically a management system) can return
configurations/commands to the unit as a result. If the DHCP Option 242 is returned in the DHCP
response from the DHCP server the system will interpret this as the External Manager address to use.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: Only the valid IP address format is accepted. An IP address that contains letters
(192.a.2.0) or unvalid IP addresses (192.0.1234.0) will be rejected.
Example: Provisioning ExternalManager Address: ""
Provisioning ExternalManager Protocol
Determine whether or not to use secure management.
Requires user role: ADMIN
Value space: <HTTP/HTTPS>
HTTP: Set to HTTP to disable secure management. Requires HTTP to be enabled in the
xConfiguration NetworkServices HTTP Mode setting.
HTTPS: Set to HTTPS to enable secure management. Requires HTTPS to be enabled in the
xConfiguration NetworkServices HTTPS Mode setting.
Example: Provisioning ExternalManager Protocol: HTTP
Provisioning ExternalManager Path
Set the path to the External Manager/Management system. If an External Manager address and a
path is configured, the system will post an HTTP message to this address when starting up. When
receiving this HTTP posting the External Manager (typically a management system) can return
configurations/commands to the unit as a result. If the DHCP Option 242 is returned in the DHCP
response from the DHCP server the system will interpret this as the External Manager address to use.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: Provisioning ExternalManager Path: "tms/public/external/management/
SystemManagementService.asmx"
Provisioning ExternalManager domain
Enter the SIP domain for the provisioning server.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: Provisioning ExternalManager Domain: "any.domain.com"
41
Administrator guide
Appendices
www.cisco.com