Software Upgrade - Cisco EX90 Administrator's Manual

Cisco TelePresence System EX90/EX60
Contents

Software upgrade

From this page you can do software upgrades and add a
release key and option keys.
Software versions
EX90/EX60 are using the TC software.
NOTE: Contact your system administrator if you have
questions about the software version.
Software release notes and upgrade files
Cisco recommends reading the software release notes
before upgrading the software. The software release notes
and upgrade files are available from the TANDBERG ftp site.
Go to: http://ftp.tandberg.com/pub/software/endpoints/tc/.
Release key
The release key is required to be able to use any of the
released software.
Contact your Cisco representative to obtain the release key.
Option key
An option key is required to activate any optional
functionality, and you may have several option keys in your
system. The options available are:
• Premium resolution
• Multisite (only EX90)
• Dual display (only EX90)
Contact your Cisco representative to obtain the option
key(s).
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Introduction Using the web interface
Upgrade software
Add the release and option keys
Contact your Cisco representative to obtain the required
key(s). If you will add both a release key and one or more
option keys, the valid procedure will be:
1. Enter the release key and press Add.
The key format: "1TC001-1-0C22E348" (each system
will have a unique key).
Enter the option key and press Add.
2.
The key format: "1N000-1-AA7A4A09" (each system
will have a unique key).
3. If you have more than one option key, add the
remaining keys.
Advanced configuration
Upgrade the software on the codec
4.
5.
6.
7.
22
Administrator guide
Appendices
Before you can start the upgrade you must
download the software upgrade file. The file format:
"s52000tc4_0_0.pkg" (each software version has a
unique file name).
Press Browse... and select the .PKG file.
Press the Upgrade button to start the installation.
Leave the system to allow the installation process
to complete. You can follow the progress on this
page. When the upgrade is successfully completed
a message will appear. The installation process may
take up to 30 minutes.
www.cisco.com