Cisco EX90 Installation Manual

Cisco TelePresence System EX90
installation guide
78-19788-01 EX90 Installation Guide | December 2010 | © 2010 Cisco Systems, Inc. All rights reserved.
EX90 is delivered with:
• EX90 unit Cables:
• Touch screen with cable • DVI-D to DVI-I cable
(recommended for optimal
• Handset base with cable
PC image quality)
• Handset
• VGA to DVI-I cable
• AC adapter and power
• Stereo audio cable 3.5 mm
cable
• Ethernet cable
• Screwdriver
• Cleaning cloth
1
Unpacking the touch screen and cables
Lift out the rectangular box
from the package.
In the box you will find cables,
and another box with the
touch screen and handset.
Unpack the touch screen with
the handset and handset base.
Cables
2
Unpacking the EX90 unit
User documentation
The user documentation for this
product, including compliance and
safety information, is found on the
Place the package on the floor with
Cisco web site.
broad side down.
Go to: http://www.cisco.com/go/
Grasp the EX90, surrounded by
telepresence/docs.
foam protection, and pull it out of
the package.
Handset
base
Handset
Touch
screen
EX90
Carefully loosen the foam protection.
Lift out the EX90 and place it on a
firm surface.
Weight: 14 kg / 31 lb