User Management - Cisco EX90 Administrator's Manual

Cisco TelePresence System EX90/EX60
Contents

User management

From this page you can manage the user accounts of your
video system. You can create a new user, edit the details of
an existing user, and delete a user. You need ADMIN rights
to perform these tasks.
User roles
You must assign one or more user roles to a user account.
Three user roles, which possess different system rights, are
defined:
• AdMIN: A user with ADMIN rights can create a new
user and change all settings, except the security audit
configurations. This user cannot upload audit certificates.
• USER: A user with USER rights can make calls and
search the phonebook.
• AUdIT: A user with AUDIT rights can change the security
audit configurations and upload audit certificates.
The roles ADMIN, USER and AUDIT have non-overlapping
rights, but a user can be created with one or more roles to
combine the rights of more than one role.
NOTE: It is very important that at least one user has ADMIN
rights at all times.
The default user account
The system comes with a default user account. The user
name is admin with no password set. The
possesses USER, ADMIN and AUDIT roles.
It is highly recommended to set a password for this user.
Security mode
You can enable/disable the strong security mode from
this page. Strong security mode sets very strict password
requirements, and requires all users to change their
password on next login.
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Introduction
User management
admin user
Using the web interface
The system comes with
user account. The
USER, ADMIN and AUDIT roles.
User name
You can create as many
user accounts as you
like on your system.
13
Advanced configuration
admin as default
admin user possesses
User role(s)
Each user must have
one or more roles.
Administrator guide
Appendices
www.cisco.com