Mount Thermostat And Outdoor Sensor - Honeywell RedLINK Installation Manual

6
Mount thermostat & outdoor sensor
3/16" holes for drywall
7/32" holes for plaster
Wall anchor
Detach wallplate
Outdoor sensor (optional)
To check location before mounting: Restore
thermostat Home screen, then hold the sensor
where you intend to install it and press the
CONNECT
button. If sensor is working properly,
thermostat will switch to display outdoor
temperature and humidity.
Français : voir la page 21 • Español: vea la página 41
Wallplate
Mount the sensor on
a vertical exterior wall,
at least 6 inches below
any overhang. Choose a
location protected from
direct sunlight.
Place sensor securely
M28491
Press and release
13
in bracket, facing
away from wall.
Mounting screw
M28490
M28492
M28483
69-2091EFS—07