Related Manuals for Honeywell RK-MIC
Summary of Contents for Honeywell RK-MIC
- Page 1 INTEVIO-Remote Call Station Product Instructions Model：RK-MIC M_2000061162_UL_1.1 M_2000060504_EN_1.0...
- Page 3 Precautions Danger This sign reminds users of “dangerous voltage” on the product. Caution This sign reminds users of important instructions attached to the product. In order to prevent electric shock, this equipment plug shall not be used as conductor to extend power supply Safety line.
-
Page 4: Important Safety Instructions
Ventilation To offset heat generated by the unit, it is necessary to provide ample ventilation around the unit. Avoid blocking or impeding the ventilation holes on the unit. To prevent unnecessary problems, install the unit in a place free from any vibrations, direct sunlight, humidity or dust circulation. Prevent liquids or other materials to enter cabinet If the unit gets wet or any foreign material enters the amplifier cabinet, immediately disconnect the AC power cord and consult your dealer or... -
Page 5: Network Security
Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. - Page 6 Password Precaution Please change the password during the system deployment. Users need to change the password regularly. The password with six numbers is preferred.
-
Page 7: Product Overview
Supports extension key modules as required. Automatic supervision of microphone and communication. The distance between RK-MCU and RK-MIC can be up to 600 meters via twisted-pair cable. Call station can be powered by RK-MCU. Up to 6 remote call stations can be connected to the system. -
Page 8: Front Panel
Front Panel Buttons/Indicators Description Connection for gooseneck or PTT Microphone socket microphone. Indicators for power supply, general fault of Device status the system, network fault and busy status of indicator lights audio bus, etc. -
Page 9: Rear Panel
Buttons/Indicators Description To avoid accidental activation, a protective cover is installed over the Emergency button. Manually The indicator light is off in standby mode. emergency button When microphone is active, the light turns green. When a microphone fault is found, the light turns orange. - Page 10 Parts/Ports Description Connection for external audio devices, such Line input as CD/DVD player, tuner, etc. Debug interface Interface to upgrade the firmware. DIP switch is used to set device address. The former 3 pins are used to set device Address address, the last one is used to set end-of- line resistor.
-
Page 11: Technical Specifications
Technical Specifications Parameters Values Power supply 24V DC Power consumption 10 W Microphone Sensitivity -50dB±3dB 60dB, A-weighted Optimal pickup distance 10～20cm Line Input Input signal 1V(0dBV) 10 KΩ Input impedance 80Hz-18KHz, ±3dB Frequency response >85dB, A-weighted <0.1% Others Built-in loudspeaker 2W/8Ω... - Page 12 Parameters Values Net weight 3.09 lbs Gross weight 5.51 lbs...
-
Page 13: Packing List
Packing List Components Qty. RK-MIC Gooseneck microphone Windshield 24V DC power adapter Twisted-pair cable (2m) Labels Debug interface terminal (3.81-3P) Audio cable Desktop bracket Product instructions... - Page 14 12 Clintonville Road, Northford, CT 06472, USA Tel: +1-800-323-4576 Manufacturer: Life Safety A/V (Guangzhou) Co., LTD No.257, Junye Road, Guangzhou GETDD, East 510530, China Tel: +86 (0)20 2839 9600 Fax: +86 (0)20 2820 8706 ©2017 Honeywell International Inc. All rights reserved.