AEG THYRO-A Operating Instructions Manual page 54

In detail
Conditions for use
Built-in unit (VDE 0160)
General requirements
Design, vertical installation
Operating conditions
Operating location, industry sector
Temperature behaviour
Storage temperature
Transport temperature E
Operating temperature better B
Load class
Humidity class
Overvoltage category
Degree of pollution
Air pressure
Protection class
Safe isolation
Up to 500 V mains voltage
Air and creeping distances
Mechanical impact
Test voltage
Tests according to
EMV noise emission
Noise suppr. control device Class A
EMV noise resistance
Compatibility level
ESD
Electromagnetic fields
Burst mains lines
control lines
Surge mains lines
control lines
Line-conducted
108
DIN EN 50 178
DIN EN 60146-1-1:12.97
DIN EN 60 146-1-1; K. 2.5
CISPR 6
DIN EN 60 146-1-1; K 2.2
D -25°C - +55°C
-25°C - +70°C
-10°C - +35°C
with external cooling (280A)
-10°C - +45°C for self air cooling
-10°C - +55°C
with reduced type current -2%/°C
1 DIN EN 60 146-1-1 T.2
B DIN EN 50 178 Tab. 7 (EN 60 721)
III DIN EN 50 178 Tab. 3 (849V)
2 DIN EN 50 178 Tab. 2
900 mbar * 1000m above NN
I DIN EN 50178 Chap. 3
DIN EN 50 178 Chap. 3
casing / mains potential Π5.5 mm
casing / control potential Π1 mm
mains voltage /contr. potent.
mains volt. interactive 2.5 mm
DIN EN 50 178 Chap. 6.2.1
DIN EN 50 178 Tab. 18
DIN EN 60 146-1-1 4.
EN 61000-6-4
DIN EN 55011:3.91 CISPR 11
EN 61000-6-2
Class 3 EN 61000-2-4:7.95
8 kV (A) EN 61000-4-2:3.96
10 V/m EN 61000-4-3:3.95
2 kV (A) EN 61000-4-4:.95
2 kV (A)
2 kV unsym. EN 61000-4-5:.95
1 kV sym. EN 61000-4-5:.95
0.5 kV
EN 61000-4-6
10 mm