How To Configure Wpa2-Psk - NETGEAR ProSafe FVG318 Reference Manual

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
3. Select WPA-PSK on the pulldown menu. The WPA-PSK menu will open.
4. Select the desired Encryption method. For WPA-PSK, you can choose TKIP or AES.
5. Enter the pre-shared key in the Passphrase field. Enter a word or group of printable characters
in the Passphrase box. The Passphrase must be 8 to 63 characters in length. The 256 Bit key
used for encryption is generated from this passphrase.
6. Enter the Key Lifetime. This setting determines how often the encryption key is changed.
Shorter periods provide greater security, but adversely affect performance. If desired, you can
change the default value.
7. Click Apply to save your settings.

How to Configure WPA2-PSK

Note: Not all wireless adapters support WPA2. Furthermore, client software is required
on the client. Windows XP and Windows 2000 with Service Pack 3 do include the
client software that supports WPA2. Nevertheless, the wireless adapter hardware
and driver must also support WPA2. Consult the product document for your
wireless adapter and WP2 client software for instructions on configuring WPA2
settings.
To configure WPA2-PSK, follow these steps:
1. Log in at the default LAN address of
and default password of password, or using whatever LAN address and password you have
set up.
4-18
http://192.168.1.1, with the default user name of admin
v1.0, October 2005
Wireless Configuration