Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Note: When NETBIOS is enabled (which it is in the VPNC defaults implemented by
the VPN Wizard), automatic traffic will reactivate the tunnel. To prevent
reactivation from happening, either disable NETBIOS or disable the policy
for the tunnel (see
Deactivate a VPN Tunnel" on page
Deleting a VPN Tunnel
To delete a VPN tunnel:
1. Log in to the Wireless VPN Firewall.
2. Click VPN Policies under VPN to display the VPN Policies screen shown below. Select the
radio button for the VPN tunnel to be deleted and click the Delete button.
Figure 6-42
6-36
"Using the Policy Table on the VPN Policies Page to
6-34).
v1.0, October 2005
Basic Virtual Private Networking