Configuring The Vpn Tunnel - NETGEAR ProSafe FVG318 Reference Manual

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318

Configuring the VPN Tunnel

Note: This scenario assumes all ports are open on the FVG318.
The figure below shows LAN to PC VPN access from an FVG318 to a VPN Client.
10.5.6.0/24
LAN IP
10.5.6.1
Router
Figure B-11
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVG318 labeled Gateway A as in the illustration above.
Log in at the default address of http://192.168.1.1 with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of
2. Use the VPN Wizard to configure the FVG318 at Gateway A.
Follow the steps illustrated in
Figure B-12 on page
• Connection Name: Scenario_1 (in this example)
C-16
Scenario 1
Gateway A
WAN IP
14.15.16.17
http://10.5.6.1
Figure B-11
B-17):
v1.0, October 2005
WAN IP
0.0.0.0
PC
(running NETGEAR
ProSafe VPN Client)
at Gateway A.
(the resulting parameter screens are shown in
VPN Configuration of NETGEAR FVG318
Client B