Accessories And Tools Needed; Accessories; Tools - Maytag Nine HN4930T User Manual

Accessories and Tools Needed
Accessories
To simplify the installation May_ag has available the installa-
tion parts shown below. You may or may not need all of these
accessories depending on your type of installation. Call
Maytag Customer Service at 3.-800-788-8899 for an autho-
rized installer.
C)
DRAIN PANS AVAILABLE IN 22" DIAMETER
(PART NUMBER 66001011) FOR WATER
HEATERS HAVING A DfAMETER 20" OR LESS,
24" DIAMETER (PART NUMBER 66001105) FOR
WATER HEATERS HAVING A DIAMETER 22"
EXPANSION TANKS FOR THERMAL EXPANSION
OR LESS AND 28" DIAMETER (PART NUMBER
CONDITIONS AVAILABLE IN 2 GALLON (PART 66001012) FOR WATER HEATERS HAVING A
NUMBER 66001013) AND 5 GALLON (PART DIAMETER 26" OR LESS
NUMBER 66001014) CAPACITY
Tools
You may or may not need all of these tools, depending on your ADDITIONAL TOOLS NEEDED
type ofinstaUation. These tools can be purchased at your local WHEN SWEAT SOLDERING
hardware store.
• Tubing Cutters or Hacksaw
• Pipe Wrenches (2) 14" • Propane Torch
• Screwdriver • So_ Solder
• Solder Flux
• Tin Snips _-_ _ !p_ _-_-_-_ " Emery CIot__HAhCK SAW
• 6 Foot Tape of Folding Rule • Wire Brushes
• Garden Hose
?
• Drill
• Pipe dope or Teflon Tape GARDEN HOSE
6 FOOT TAPE _PNEcH _RE BRUSH
ROLL OF TEFLON TAPE
(USE ONLY ON WATER
CONNECTIONS) C_I_I/2"WIRE BRUSH
_ _ PROPANE TORCH
SLOT-HEAD SCREWDRIVER
TIN SNIPS
PHILLIPS SCREWDRIVER ROLL OF LEAD FREE
SOFT SOLDER
PIPE DOPE (SQUEEZE TUBEI
(USE FOR WATER AND ROLL OF EMERY
GAS CONNECTIONS) _ CLOTH SOLDER FLUX TUBING CUTTER
8