Chassis To Switch - D-Link DGS-6600 Series Hardware Installation Manual

DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide

Chassis to Switch

There is a great deal of flexibility on how connections are made using the appropriate cabling.
"Connect a 10BASE-T switch port to the Switch via a twisted-pair Category 3, 4 or 5 UTP/STP cable.
"Connect a 100BASE-TX switch port to the Switch via a twisted-pair Category 5 UTP/STP cable.
"Connect 1000BASE-T switch port to the Switch via a twisted pair Category 5e UTP/STP cable.
"Connect switch supporting a fiber-optic uplink to the Switch's SFP ports via fiber-optic cabling. See cabling
guidelines in Appendix B for more information.
Figure 3-2 Connecting a DGS-6604 Chassis Switch to another switch
53