Dgs-6600-16Xs-D - D-Link DGS-6600 Series Hardware Installation Manual

DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide

DGS-6600-16XS-D

The basic appearance of the DGS-6600-16XS-D module is shown in Figure 1-8. The DGS-6600-16XS-D is a line
card module of the DGS-6604/6608, which provides 16x 10G SFP+ ports.
Interface
The DGS-6600-16XS-D features 16x 10G SFP+ ports
LEDs
The DGS-6600-16XS-D uses different colored LEDs to indicate different systems status, described in Table 1-9.
LED
Color and Status
Indicator
Power Solid Green
Off
System Solid Green
Solid Red
Blinking Green
Off
Link/Act/ Solid Green
Speed Mode
Blinking Green
Solid Amber
Blinking Amber
Off
Figure 1-8 Basic Appearance of the DGS-6600-16XS-D
This LED will light solid green when the Switch is powered on.
This LED will remain off when the Switch is powered off.
This LED will light solid green when the Switch is operating
normally.
This LED will light solid red when the Switch has failed.
This LED will blink green while the Switch is booting up or
shutting down.
This LED will remain off when the Switch is shut down.
This LED will light solid green when there is a secure
connection (or link), with a link speed of 10G.
This LED will blink green when there is activity occurring on a
port that is operating.
When there is a secure connection or link at any of the ports
with a link speed of 1G.
When there is a reception of transmission.
This LED will remain off when there is no link on the port.
Table 1-9 DGS-6600-16XS-D LED Behavior
.
Description
19