Step 1: Unpacking; Step 2: Switch Installation; Desktop Or Shelf Installation - D-Link DMS-1100-10TS User Manual


Do not modify power cables or plugs. Consult a licensed electrician or your power company for
site modifications.

Always follow your local/national wiring rules.

When connecting or disconnecting power to hot-pluggable power supplies, if offered with your
system, observe the following guidelines:
•
Install the power supply before connecting the power cable to the power supply.
•
Unplug the power cable before removing the power supply.
•
If the system has multiple sources of power, disconnect power from the system by
unplugging all power cables from the power supplies.

Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system.
Avoid sudden stops and uneven surfaces.

Step 1: Unpacking

Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the
User Manual to make sure all items are present and undamaged.
One D-Link DMS-1100 Series switch
One Multilingual Getting Started Guide
User Guide CD
Power Cord and Power Cord Retainer
Rack-mount kit and Rubber Feet
If any item is found missing or damaged, please contact the local reseller for replacement.

Step 2: Switch Installation

For safe switch installation and operation, it is recommended that you:
Visually inspect the power cord to see that it is secured fully to the AC power connector.
Make sure that there is proper heat dissipation and adequate ventilation around the switch.
Do not place heavy objects on the switch.

Desktop or Shelf Installation

When installing the switch on a desktop or shelf, the rubber feet included with the device must be attached
on the bottom at each corner of the device's base. Allow enough ventilation space between the device and
the objects around it.
Figure 2.1 – Attach the adhesive rubber pads to the bottom
8
D-Link DMS-1100 Series User Manual