Cannot Connect Wirelessly Using Wps - Buffalo LPV4-U2-300S User Manual

Cannot Connect Wirelessly Using WPS

Case 1: The access point is using WEP encryption.
If the encryption method is set to WEP, you cannot use WPS to connect to the access point. Navigate to Network -
Wireless LAN - Advanced Settings and configure manually.
Case 2: The access point has SSID broadcasting disabled.
You will never find the access point if it disables broadcasting SSID. Navigate to Network - Wireless LAN - Advanced
Settings and configure manually.
Case 3: The access point is using WPA2-PSK (TKIP) authentication.
WPA2-PSK (TKIP) is not supported.
52