Use Scanning Function; Change Print Server's Ip Address - Buffalo LPV4-U2-300S User Manual

Use Scanning Function

Follow the procedure below to use the printer's scanning function. The printer's driver may be required. For more
information, refer to your printer's manual.
1
Open Network-USB Navigator and connect to your printer.
2
Use the printer's scanning function. You may disconnect the printer afterwards.

Change Print Server's IP Address

Follow the procedure below to change the print server's IP address.
1
Open print server Settings and log in.
2
Navigate to Network - TCP/IP.
3
Disable DHCP and manually configure the IP address, subnet mask, and default gateway; click Apply when finished.
43