Case 2: The IP address is invalid.
If print server was assigned an invalid IP address, Settings cannot be accessed. If you cannot open Settings, initialize the
print server, which restores all settings to their factory default values.
Print Server Is Not Displayed on LPV4 Port Setup Wizard
Case 1: The IP address is invalid.
If the print server was assigned an invalid IP address, Settings cannot be accessed. If you cannot open Settings, initialize
the print server, which restores all settings to their factory default values.
Case 2: Print server is not connected correctly.
If it is connected correctly, the LEDs will be lit as shown below.
For wired connection:
For wireless connection:
Note: If the LAN LED is not lit while an Ethernet cable is connected, check the router and its connection.
48