Making Calls; Redial; Speed Dials; Taking Calls - Cisco 504 Quick User Manual

Hide thumbs Also See for 504:

Making calls

There are three ways to make calls on the Cisco 504. You can:

lift the handset or

push the headset button or

push the speaker button.

When you hear the dial tone, enter your number and push Dial to call.

Note: You don't need to dial 9 first to get an outside line.

To call a number you've called before, press the Redial soft key. Use your navigation button to scroll to

the number you want to dial.

You should always set up and manage all speed dials through the Horizon Portal to make sure they're

not deleted every time you run a system upgrade or firmware refresh. To set up speed dials, see your

Horizon Portal guide.

You can answer a call on the Cisco 504 in three ways:

lift the handset or

push the headset button with the handset still on the phone or

push the speakerphone button with the handset still on-hook.

Taking more than one call

You can take up to three calls on your line, if you have Call Waiting activated – check with your system

administrator. You'll know if there's a second incoming call by:

the second line button flashing red or

Cisco 504 IP Phone

Quick User guide

Page

Table of Contents