Cisco SPA 501G Administration Manual page 285

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Ext Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
G729a Enable
G722 Enable
G723 Enable
G726-16 Enable
G726-24 Enable
L 16 Enable
G726-32 Enable
G726-40 Enable
Description
To enable the use of the G.729a codec at 8 kbps,
select yes. Otherwise, select no.
Defaults to yes.
Enables use of the G.722 codec. Defaults to yes.
NOTE Not applicable to the WIP310.
To enable the use of the G.723a codec at 6.3 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE G.723. 1 is not supported on the Cisco SPA
525G or WIP310.
To enable the use of the G.726 codec at 16 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not supported on the Cisco SPA 525G.
To enable the use of the G.726 codec at 24 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not supported on the Cisco SPA 525G or
WIP310.
To enable the use of the L16 codec, select yes.
Otherwise, select no.
Defaults to yes.
NOTE Cisco SPA 525G only.
To enable the use of the G.726 codec at 32 kbps,
select yes. Otherwise, select no.
Defaults to yes.
To enable the use of the G.726 codec at 40 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not applicable to the Cisco SPA 525G.
B
274