Attendant Console Tab (Cisco Spa 500 Series); General - Cisco SPA 501G Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference

Attendant Console Tab (Cisco SPA 500 Series)

Attendant Console Tab (Cisco SPA 500 Series)
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
This tab includes the following sections:
• General, page 281
• Unit 2, page 282

General

Parameter
Subscribe Expires
Subscribe Retry Interval
Unit 1 Enable
Subscribe Delay
Unit 2 Enable
Server Type
Test Mode Enable
Attendant Console Call
Pickup Code
Description
Specifies how long the subscription remains valid.
After the specified period of time, elapses, the Cisco
SPA 500S initiates a new subscription.
Defaults to 1800.
Specifies the length of time to wait to try again if
subscription fails.
Enables or disables the first Cisco SPA 500S unit (each
IP phone can have up to two Cisco SPA 500Ss
attached).
Length of delay before attempting to subscribe.
Defaults to 1.
Enables or disables the second Cisco SPA 500S unit
(each IP phone can have up to two Cisco SPA 500Ss
attached).
Selects the type of server used (Cisco SPA 9000,
BroadSoft, or Asterisk).
Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the Cisco SPA
500S are returned to off, all the keys become orange.
The IP phone must be rebooted after the test is
completed.
The star code used for picking up a ringing call.
Defaults to *98.
B
281