Line Key - Cisco SPA 501G Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
NOTE
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

Line Key

When used in the configuration profile, parameters in this section must be
n
appended with , where
these parameters, see the
page 20.
Does not apply to the WIP310.
Parameter
Extension
Short Name
Share Call Appearance
Extended Function
n
represents line 1, 2, 3, 4, 5 or 6. For more information on
"Configuring Lines and Extensions" section on
Description
Extension number of the line key.
A short label shown on the LCD display for line key 1
through line key 6.
Yes indicates that Line Key 1/2/3/4/5/6 is a shared call
appearance. Otherwise this call appearance is not
shared (it is private).
Defaults to no.
Use to assign Busy Lamp Field, Call Pickup, and Speed
Dial Functions to Idle Lines on the IP phone.
Syntax is:
fnc=type;sub=stationname@$PROXY;ext=
extension#@$PROXY
where:
•
fnc: function
•
blf: busy lamp field
•
cp: call pickup
•
sub: station name (not needed for speed dial)
•
ext or usr: extension or user (the usr and ext
keywords are interchangeable)
B
246