Makita 9046 Instruction Manual page 5

Installing or removing the abrasive paper
CAUTION :
Always be sure that the tool
i s
switched off and unplugged before installing or removing
the paper.
When using the conventional type of abrasive paper (standard equipment)
:
Turn the clamp lever to open the clamper. Insert the paper end into the clamper, aligning
the holes in the paper with those in the pad. Then return the clamp lever to the original
position to secure the paper. Repeat the same process for the other end of the tool, main-
taining the proper paper tension.
Conventional type
1 -
of abrasive paper
When using the Velcro type of abrasive
paper (optional accessory) :
Remove all dirt or foreign matter from the
pad. Attach the paper to the pad, aligning
the holes in the paper with those in the
pad.
CAUTION
:
Always use Velcro type of abrasive papers.
Never use pressure-sensitive abrasive paper.