Table of Contents
Advertisement
16
12.12
Volume Control
Use the volume buttons
6 levels available.
>The display shows the volume level setting on the screen when it is being adjusted.
12.13
To intercept a call
If you hear the answering machine recording a message, you can intercept the call and speak to
the caller, either by lifting the handset, or pressing the speakerphone button
machine, or by answering the call with another phone connected to the same line.
After intercepting a call any recording up to the intercept will be saved as a new message.
>If you intercept a call within 3 seconds of its start, you may sometimes need to press the stop
button
to stop recording.
12.14
To delete a recorded message
During message playback, press the delete button
>The display prompts "DELETE?".
Press the OK button
>After the erasure is complete, the numeric order of the remaining messages will be rearranged.
12.15
To delete all old messages
After playing back all of your messages, press and hold the delete button
>The display prompts "DELETE ALL?".
Press the OK button
>The display shows "DELETE ..." and after a short delay you will hear "All messages erased".
>The machine will not delete any new messages that have not been played.
>The display automatically returns to standby mode.
12.16
To go back to the default OGM
If you no longer want callers to hear the OGM's that you have recorded, you can delete them and
revert to the pre-recorded defaults as follows:
Make sure the machine is switched on.
>If necessary, press and release the stop button
Press the OGM button
While the announcement is playing, press the delete button
>The display automatically returns to standby mode.
Press the OGM button to play the pre-recorded OGM for confirmation.
13
REMOTE OPERATION
Your phone lets you check your messages or otherwise operate your answering machine, by calling
the answering machine when you are away from home. To protect your privacy, access is only possible
if you enter the three-digit remote access code. The base will display "REMOTE" while the unit is
being accessed remotely.
to adjust the volume of the loudspeaker during playback, from the
to confirm.
to confirm.
to play the current announcement.
.
to switch to the OGM you want to delete.
followed by the OK button
on the answering
.
.
Advertisement
Table of Contents
