BECAUSE WE CARE Thank you for purchasing this product. This product has been designed and assembled with utmost care for you and the environment. This is why we supply this product with a quick installation guide to reduce the number of paper (pages) and therefor save trees to be cut for making this paper. Thank you for supporting us to protect our environment.
TIMER Button - Press to check the duration of the last call, or to restart the timer. FLASH Button - Press to send a Flash time for PBX. Microphone Handset cord socket on the handset Handset cord socket on the base unit Hook switch Parking Ringer high/low switch...
Place the Base unit on any flat surface in a suitable location. to modular wall jack 2. Wall mount To place the Style 5 phone on a wall, mark two points on the wall that are 84mm apart for the screw positions, as shown below. to modular wall jack...
TELEPHONE OPERATIONS Timer display The Style 5 phone is equipped with a timer display that shows the duration of a call. The timer will automatically stop after the call has ended. To display the duration of the last outgoing call.
Page 7
1. If you make a mistake , hang up the Handset and repeat the procedure for storing a number from the beginning. 2. All memories will be erased if the Style 5 is disconnected from the telephone line for too long , e.g. longer than 30 minutes.
“The phone does not ring.” • Make sure you‘re using the telephone line cable that was supplied with your Style 5 phone . O t h e r telephone line cables might not work. • Check that the total REN value of all equipment connected to your telephone line is not more than 4.
• Remember to include the mains adapter. After the Guarantee has expired If the unit is no longer under Guarantee, contact us via www.aegtelephones.eu TECHNICAL DETAILS Model Style 5 Telephone Temperature range Operating 0 ºC to 40 ºC Storage -20 ºC to 60 ºC PBX compatibility Timed break recall = 98 ms.