Makita VC1310L Instruction Manual page 8

detent protrusion.
Installing the pipe holder (optional accessory)
For Model VC1310L only
1
011604
Depress the cord hook as shown in the figure.
1
1. Press
2. Pipe holder
3. A section
4. Hooks
5. Tank cover
011605
Attach the pipe holder onto the cord hook. (The hooks
are away from the tank cover.)
Raise the pipe holder as far as the hooks contact the tank
cover and press the A section of the pipe holder.
011606
Press the A section with a great force and with the A
section so pressed lower the pipe holder.
1. Cord hook
2
4
5
1. Press with a
force and lower
1
011607
3
011608
Fit two protrusion of the pipe holder into the grooves of
the tank cover and then press down the pipe holder.
1
011631
NOTE:
The pipe holder that is excessively lowered than
•
the intended position cannot be installed on the
cord hook with the hook away from the tank cover
as shown in the figure.
1
2
011632
NOTE:
Make sure that the two hooks of the pipe holder are
•
hooked on the tank cover securely.
Connecting a hose
CAUTION:
Never force the hose for bending or stamp it. Never
•
move the cleaner by a hose. Forcing, stamping and
8
2
1
3
2
1. Tank cover
2. Protrusion of the
pipe holder
3. Groove
1. Tank cover
2. Hook
1. Tank cover
2. Hook