Makita VC1310L Instruction Manual page 6

1. Storing the power supply cord
NOTE:
Do not use the cleaner or a connected electric
•
power tool with a power supply cord wound on
the base hook. Using the cleaner or the connected
electric power tool with power supply cord may
cause damage the power supply cord.
011597
2. Storing the front cuffs
Front cuffs 22, 24 and 38 can be stored (up to two at a time.)
011598
3. Storing the hose
011599
4. Resting a reasonable size of electric power
tool for the base hook, such as circular saw.
011645
1. Power supply
1
cord
2. Base hook
2
1. Front cuffs
1
1. Hose
1
Locking or unlocking the caster
For Models VC1310L and VC2510L
1
011611
For Model VC3210L
3
1
4
2
011615
To lock the caster with a stopper, lower the stopper lever
and the caster no longer will rotate. To release the caster
from the locked position, raise the stopper lever.
Locking the caster is convenient when storing the cleaner,
stopping the work on the way and keeping the cleaner
still.
To operate the stopper, move it by hand.
NOTE:
When moving the cleaner, make sure that the
•
caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage to
the caster.
ASSEMBLY
CAUTION:
Always be sure that the cleaner is switched off and
•
unplugged before carrying out any work on the
cleaner.
6
1. Caster
2. Stopper lever
3. FREE position
4. LOCK position
3
4
2
1. Caster
2. Stopper lever
3. FREE position
4. LOCK position