Makita VC1310L Instruction Manual page 7

Installing the water filter
6
1. Tank cover
2. Powder filter
3. Damper
4. Prefilter
5. Tank
6. Mounting position marking
011637
To pick up water or wet dust, remove prefilter and
damper and then use water filter.
3
1. Water filter
2. Tank
3. Mounting position marking
011630
When installing the water filter on the tank, set it tight at
the opening of the tank so that the hook of the water filter
engages the tank opening firmly and there is no space
between the water filter and the tank.
Also, install the water filter so that the mounting position
marking can be aligned.
NOTE:
Models VC2510L and VC3210L have no mounting
•
position marking and no need to align it.
1
Installing the paper pack
WARNING:
2
When using the paper pack, also use the prefilter
•
together that is preinstalled on the tool. Failure to
use the prefilter together may cause unusual noise
3
and heat, resulting in a fire.
CAUTION:
4
Never pick up water or other liquids or wet dusts
•
when using the paper pack. Picking up such things
may cause the paper pack breakage.
5
011638
1. Remove the rubber holder.
2. Extend the paper pack.
1
011588
2
011589
3. Align the paper pack opening with the dust suction
opening of the cleaner.
4. Insert the cardboard of the paper pack onto the
tool so that it is positioned at the end beyond the
7
1. Rubber holder
1
1. Paper pack
1